[TR] TR4A engine and clutch
Dean Tetterton
tr3a58 at verizon.net
Fri Feb 19 16:12:09 MST 2016
Don't forget that the front engine plate is different. Motor mount location
changed because of the change in frame width.
Dean
On Feb 19, 2016, at 6:01 PM, Andrew Uprichard wrote:
> So the engine I am building for the next TR3 is a TR4A engine. Easy enough to remove the plug and use the TR3 engine breather, but of course the flywheel is different and I need to get a new TR4A clutch.
>
> Questions: is there a throw-out bearing sleeve specific to the TR4A? Will a late TR3 starter work with the TR4A flywheel? Is there anything else I need to be aware of as I move along?
>
> By the way, just as an aside, why do flywheels have an arrow on the side, pointing towards the teeth?
>
> Andrew Uprichard
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tr3a58@verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160219/8e17fd0d/attachment.html>
More information about the Triumphs
mailing list