[TR] Ring gaps
David Porter
frogeye at porterscustom.com
Fri Feb 12 15:11:26 MST 2016
0.004 per inch of bore..
DaveP
On 2/12/2016 2:02 PM, Andrew Uprichard wrote:
>
> The manual for the TR3 says the ring gap should be 0.003 – 0.010. But
> I have new pistons and rings marked that the gap should be 0.003 –
> 0.004 per inch diameter of the bore. 3 thou sounds awfully tight to
> me, but what do others think?
>
> On a related subject, a friend has an engine where the ring gap is
> 0.040. How much of this could be made up by simply replacing the
> rings? Or is there a point at which the only solution is bigger
> pistons +/- rebore?orter Porter Custom Bicycles 2909 Arno St. NE
> Albuquerque, NM 87107 505-352-1378 Go HERE: my world www.porterbikes.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160212/93bf2323/attachment.html>
More information about the Triumphs
mailing list