[TR] TR4 Rear Axle Question

[James Henningsen]

Yes. They are a single cast rubber piece that I got from TRF.  I was thinking of cutting on the thin side so you could wrap it around tube but what would keep it attached?  The parts manual doesn't show any tie downs 
Jim

Sent from my iPhone

> On Aug 21, 2016, at 2:16 PM, Geo Hahn <ahwahneetr at gmail.com> wrote:
> 
> Do you have the replacement buffer in hand?  Mine are split along the non-buffer (thin) area to allow them to be fit over the axle.
> 
> Geo
> 
>> On Sun, Aug 21, 2016 at 8:49 AM, James Henningsen <trguy75 at gmail.com> wrote:
>> List:
>> 
>> I am finishing up the complete rebuild of my TR4 rear axle (rigid axle).  How do you put on a new rear axle buffer.  I will have the axles out of the tube but there is still a sizeable end flange on the tube to slip over.  Is the technique to heat the rubber buffer up and stretch it over? 
>> 
>> Thanks,
>> 
>> Jim Henningsen
>> 
>> Ocala, FL
>> 
>> 62 TR4
>> 
>> 75 TR6
>> 
>> 73 Jag XKE
>> 
>> 75 Celica
>> 
>> 81 Supra (with 23,0000 orig miles)
>> 
>>  
>> 
>> 
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160821/565ddbc2/attachment.html>