[TR] TR3A steering help

[Dave]

Thanks for the tip.  I'll probably look into it over the winter.
 

 

Dave Massey


 

 

-----Original Message-----
From: Randall <TR3driver at ca.rr.com>
To: triumphs <triumphs at autox.team.net>
Sent: Wed, Sep 30, 2015 11:25 am
Subject: Re: [TR] TR3A steering help



> The front end was completely renewed (except for the steering 
> box) so it
is not the tie-rod ends or idler arm.  

Assuming of course that the new parts
are good.  Not always the case.

I hear you on not pulling the apron (had the
same issue myself when the pin worked loose).  But just like before, once it was
done,
the results were worth the effort.

FWIW I've tried several methods of
checking the shaft end float.  Dial indicator seems to be the only accurate one
for
me.
http://s258.photobucket.com/user/TR3driver/media/Tools/DSCF0013_crop.jpg.html

Randall


**
triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150930/2514727d/attachment.html>