[TR] TR3A Leaf Spring front pin/bolt

[Geo Hahn]

Art --

For a couple of years I soaked mine in PBlaster every time I was working in
the area, I also cleaned the threads and put a bolt in them to keep them
clean.

When the day came to remove one (broken spring) I used a method outlined by
Randall that applies a length of all-thread and an assortment of sockets,
washers and a nut to pull it out.

Came out as smoothly as a cork from a wine bottle.

YMMV (by quite a bit apparently).

Geo

On Fri, Sep 18, 2015 at 7:23 AM, Art McEwen <amcewen2 at cogeco.ca> wrote:

> So what's the collective wisdom for getting that $*@(ing thing out?
>
> Thanks,
>
> Art.
> TS64989LO
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150918/373e1e9d/attachment.html>