[TR] Clutch Fork Taper Pin

terryrs at comcast.net terryrs at comcast.net
Fri Oct 23 15:35:28 MDT 2015


Thank you, Randall, I did.  In fact, it took a bit but I finally remembered to check the adjustment at the master cylinder which was waaaaay off.  Went from severe slip to nearly nought.  

----- Original Message -----
From: "Randall" <TR3driver at ca.rr.com>
Cc: triumphs at autox.team.net
Sent: Wednesday, October 21, 2015 8:39:19 PM
Subject: Re: [TR] Clutch Fork Taper Pin


> Thank you, everyone.  It's mild slippage that only happens 
> when I drop to third to pass, then shift to fourth at high 
> rpm.  

Did you check the clutch adjustment?  My experience is that the stock TR3 clutch doesn't wear very fast, but when it does, it closes
up the free play at the slave cylinder.  Once the freeplay is gone, the clutch cannot engage fully.

Randall


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net


More information about the Triumphs mailing list