[TR] OD transmission

David Porter frogeye at porterscustom.com
Tue Oct 6 15:32:24 MDT 2015



On 10/6/2015 12:28 PM, David Porter wrote:
> Several possibilities come to mind.. for some (very odd) reason upon a 
> load the voltage drops enough to allow the solenoid to drop out (check 
> your fan belt) or as others mentioned the clutch assembly is not fully 
> engaged (bent thrust carrier posts) and most likely, given your 
> description, is that the bearings in the uni direction clutch and the 
> face of the annulus, where the bearings sit in their "ramps" are worn 
> and slip under heavy load. This I would think would make some sort of 
> noise. Also check that the brake ring is not cracked. And lastly or 
> firstly make sure that the operating lever is properly adjusted..
>  TR's were not fitted with a throttle switch, which would be the first 
> thing to consider...as that is the same symptom based on throttle 
> position..
> DaveP

-- 
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
87107 505-352-1378 Go HERE: my world www.porterbikes.com/


More information about the Triumphs mailing list