[TR] triumph TR6 Seat frame/track problems

[Dave]

Check which holes he used at the front.  There are two holes on the front of each seat.  Proper alignment uses the forward hole on the outboard side and the rearward hole on the inboard side.  Odds are the upholstery guy used the front holes on both sides.

 

 

Dave Massey


 

 

-----Original Message-----
From: Jonas Payne <jpaynepbr at cox.net>
To: 'Triumphs List' <triumphs at autox.team.net>
Sent: Sun, Nov 29, 2015 4:12 pm
Subject: [TR] triumph TR6 Seat frame/track problems



I got my 1971/1972 TR6 back from the upholstery shop and noticed that the seats aren’t level and the safety catches were inoperable (you can just tilt them forward without using the release lever).
 
It would appear that there was a “catch” that is supposed to be on the seat runner assembly  that is no longer there.
 
Does anybody have a photo of these things installed they could share?
 
Jonas Payne
PBR Consulting Services, LLC
702.882.6711
 


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151129/1a960445/attachment.html>