[TR] TR6 door pins

[Stan Foster]

Numerous options after you have compressed the gubbins to expose the spindle and hole including surgical locking forceps to hold the pin secure while you insert it or use coat hanger wire, sawn through about half inch from the end, insert it and then bend to break off the end remaining in the handle spindle.

Stan

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Joe Burlein
Sent: Sunday, November 8, 2015 4:27 PM
To: Triumphs <triumphs at autox.team.net>
Subject: [TR] TR6 door pins

Ok, it has been years since I've had the door panels off my car. I just got done doing some work on them and I can't get the stupid handles on!  What is the trick?!?  HELP! 

Joe B
72 TR6

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stan@redtr6.com