[TR] Tach needle (TR3)

Carl TR cfmtr3a at verizon.net
Sun May 3 23:19:24 MDT 2015


Thanks for the link Don.   I have added it to my resource collection and
will be referring to it next weekend when I chase down both the tach and
fuel gauge issues..  
C

Carl
1960 Triumph TR3A - TS81802LO
Tampa, FL

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Don
Hiscock
Sent: Sunday, May 03, 2015 9:38 PM
To: Andrew Uprichard
Cc: triumphs at autox.team.net
Subject: Re: [TR] Tach needle (TR3)

You've read through the troubleshooting tips on the old "SMITHS The Care of
Instruments" pamphlet on the Vintage British Cables site, yes?
 I've found that a useful publication.

http://vintagebritishcables.com/The-Care-of-SMITHS-Instruments.php


On 5/3/15, Andrew Uprichard <auprichard at uprichard.net> wrote:
> I have just put 100 miles on my newly-restored '57 small-mouth and am 
> working through the usual "teething" problems:  leaks, oil pressure 
> adjustment, electrical glitches, etc.  One thing I cannot work out is 
> that the needle on the tach swings about quite a bit:  it's ok at 
> steady rpm, but gear changes cause marked fluctuations.
>
>
>
> I had the gauge rebuilt by Nisonger and I have a new cable.  Any 
> thoughts why this should be so?
>
> Andrew
>
>

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net



More information about the Triumphs mailing list