[TR] Chroming TR4 tail lamp assembly

[Don Hiscock]

Oops -- my mistake!

One of our correspondents reminds me my bad experience was with Gateway
Plating (in South St Louis), not St Louis Plating (in North St. Louis)!
I've not used St. Louis Plating.

Sorry 'bout that, and apologies.

On Fri, Mar 20, 2015 at 11:33 PM, Don Hiscock <don.hiscock at gmail.com> wrote:

> My iPhone apparently doesn't like my language.  Read "absolute crap" for
> "absol" below...
>
>
> I had some work done at St Louis Plating a few years ago.  (They're less
> than ten miles from my house).
>
> I was marginally disappointed in the work on my car's grab rail (they
> polished some of the original shape of the casting away as they rounded all
> the edges) and I was extremely disappointed in the work on my valve cover.
> I wish they'd simply told me it wasn't able to be refinished rather than
> take my money to plate over the rough surface. It looked like absol, but
> thankfully one of our list members here was able to donate a replacement.
>
> Here's hoping YMMV.
>
> On Fri, Mar 20, 2015 at 11:20 PM, Don Hiscock <don.hiscock at gmail.com>
> wrote:
>
>> I had some work done at St Louis Plating a few years ago.  (They're less
>> than ten miles from my house).
>>
>> I was marginally disappointed in the work on my car's grab rail (they
>> polished some of the original shape of the casting away as they rounded all
>> the edges) and I was extremely disappointed in the work on my valve cover.
>> I wish they'd simply told me it wasn't able to be refinished rather than
>> take my money to plate over the rough surface. It looked like absol, but
>> thankfully one of our list members here was able to donate a replacement.
>>
>> Here's hoping YMMV.
>>
>>
>> On Friday, March 20, 2015, <john-marie at sbcglobal.net> wrote:
>>
>>> For anyone interested, the vendor was St. Louis Plating, 314-652-0488.
>>> Tail lamp assemblies were $60 each, side lights, also in bad shape, were
>>> $50 each, front over riders $40 and rear $50 each.  These prices increased
>>> $10 from a year ago.  I contacted 4 vendors last year.  St. Louis Plating's
>>> prices were as good or better on most items.
>>> John DeLuca
>>>
>>> Sent from my iPad
>>>
>>> On Mar 20, 2015, at 8:56 AM, Geo Hahn <ahwahneetr at gmail.com> wrote:
>>>
>>> John -
>>>
>>> In addition to a name, the price might also be useful as the cost of
>>> plating seems to vary quite a bit across the U.S.  Something as small as
>>> taillamp housing could be shipped if the quality and price warranted.
>>>
>>> The local shop I used did a fine job on mine - I would have called them
>>> 'pitted' but not 'badly pitted' - but it was so long ago that their price
>>> would be way out of date.
>>>
>>> Geo
>>>
>>> On Thu, Mar 19, 2015 at 6:41 PM, <john-marie at sbcglobal.net> wrote:
>>>
>>>> Hello List,
>>>> This is a follow-up to a very old discussion on re-chroming badly
>>>> pitted TR4 tail light housings.  There was interest in hearing of any
>>>> vendor that would/could chrome the housings.  I recently brought mine to a
>>>> local vendor (St. Louis) and picked them up today.  I am very satisfied
>>>> with the results.  The housings were badly pitted, but the vendor was able
>>>> to remove all but a few of the worst pits.  Thought it was worth mentioning.
>>>> John DeLuca
>>>> TR4A in Restro.
>>>>
>>>> Sent from my iPad
>>>>
>>>> ** triumphs at autox.team.net **
>>>>
>>>> Donate: http://www.team.net/donate.html
>>>> Archive: http://www.team.net/archive
>>>> Forums: http://www.team.net/forums
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>>>>
>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150321/4827b100/attachment.html>