[TR] Clutch Operating Shaft

[terryrs at comcast.net]

Ahah!  Nope.  It's pointing straight to the wall of the car.  Easy peazy to swap out.

I always like to state the obvious, because that's what I know.  ...Then sometimes, ...I don't.  

Much appreciatee, Geo.

Terry

----- Original Message -----
From: "Geo Hahn" <ahwahneetr at gmail.com>
To: terryrs at comcast.net
Cc: "Triumph List" <triumphs at autox.team.net>
Sent: Sunday, March 15, 2015 2:41:16 PM
Subject: Re: [TR] Clutch Operating Shaft

Not sure what could be tight about it -- is the Zerk pointing down?

On Sun, Mar 15, 2015 at 11:14 AM, <terryrs at comcast.net> wrote:

> Anyone have a trick for reaching the grease fitting on the clutch
> operating shaft with transmission installed?  Yikes it's tight!
>
> Terry Smith, '59 TR3A TS 58667
> New Hampshire
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>