[TR] How to check if a cylinder head is warped with DIY stuff at home?

[David Porter]

straight edge and feeler gauge. Set the edge on the gauge, don't try to 
push it between.  Probably up to .003 is OK with a decent head gasket..

On 3/13/2015 12:50 PM, Sujit Roy wrote:
> I have a head from a Triumph. It was was removed by the previous 
> mechanic due to a leaking head gasket.
>
> How can I check the head is warped?
>
>
> Sujit
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com

-- 
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
87107 505-352-1378 Go HERE: my world www.porterbikes.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150313/9b8cec4d/attachment.html>