[TR] Triumph GT6 rear brakes

[ptegler]

sorry...hit send to quick....
I'd suggest staying away from drilled rotors. They have been known to 
crack as the hole create stress fractures post heat cycling.
dippled and slotted rotors do help gasses escape the gap between shoe 
and rotor surface.
You to to note also that when people talk about how good brakes 
are...it's not the normal road use issues.... but brake fade when HOT.
Big brakes do help (larger surface contact areas) but unless you're hard 
on brakes, or auto-x or race.... as decent set of semi metallic shoes 
work fine and miminize the dusting of the wheels from brake dust, as 
well as work better than when warmed up.
Bu the biggest issue of all and I find interesting is people commenting 
on brakes that do/don't work right...when they were not bedded in 
properly. Unless you properly bed in new pads on clean drum/disk 
surfaces.... no brakes really work as well as they could/should. The 
differences are quite amazing.
yes..personally I like the slotted/dimples rotors. If they have a 'name' 
on them, you're usually paying more for that then the units themselves.
Good parts can be had for good prices...just got think and look around.

happy parts hunting

ptegler

On 3/8/2015 9:58 AM, Joao Simoes wrote:
> Hi folks.
>
> I have been noticing that apparently there is a shortage of new rear 
> brake drums and original wheel cylinders for a mk3 GT6. I either find 
> 'non available' as far as the drums or for the rear wheel cylinders, a 
> smaller diameter being the only available ones.
> Any experiences here? I will try to see if rebuild kits are available 
> on the cylinders and may have to reuse my drums, which are sort of at 
> the max diameter limit.
>
> Also, what's the scoop on the Gt6's brakes? Are stock ones good? My 
> car has a booster, is it really necessary because the Spitfire never 
> had one and it seems to stop well.
>
> Are those upgraded discs, like EBC and others really any better? Or 
> are they just cool looking, which will it matter to me because I am 
> using the stock wheels, so you can barely see the discs anyway.
>
> Take care,
>
> Joao
>
> On Mar 6, 2015, at 9:32 PM, Dave Connitt <dconnitt at fuse.net 
> <mailto:dconnitt at fuse.net>> wrote:
>
>> So I started to replace my broken TR4A IRS speedometer cable and it 
>> seems the break was just inside the drive on the transmission. There 
>> aren't any remains of the speedometer cable sticking out of the drive 
>> so I need to pick the cable remains out of the drive somehow. Is it 
>> possible to remove the drive gear from the transmission? I was hoping 
>> I could remove the drive and at least not have to fish out the broken 
>> cable stub laying on the cold garage floor.
>> If I can't easily remove the drive, has anybody "been there, done that"?
>> Thanks,
>> Dave Connitt
>> 1968 TR4A IRS
>> http://www.davestr4a.com
>>
>> ** triumphs at autox.team.net <mailto:triumphs at autox.team.net> **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/triumphs/jmbs46@comcast.net
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler ptegler at verizon.net www.teglerizer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150308/c304e235/attachment.html>