[TR] grease gun

[Geo Hahn]

In my experience, almost any grease gun with a hose will suit for all but 3
zerks on a TR4.

For the u-joints on the driveshaft you may have to use a long zerk (some
u-joints came with these) as the space it too tight for some grease gun
tips.

For the zerk on the propshaft/driveshaft slider you'll need some sort of
right-angle attachment to reach in there.

Of course the grease for the steering rack requires you temporarily replace
a bolt (holds a ground cable) with a zerk to get the job done.

If you have used tie-rod ends w/o zerks ('lifetime lubed') you might
consider a needle attachment that lets you add some grease to the boot.

Geo

On Sat, Mar 7, 2015 at 4:02 PM, dave n <dave at ranteer.com> wrote:

>   I have a tr6 and a tr4.
>
> looking for recommendations on a grease gun that will get all the grease
> points and the trunnions
>
> thanks!
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150307/b0241ed2/attachment.html>