[TR] TR4 Rear Fender Attach

[James Henningsen]

That seems to make sense rather than between fender and tub.  I put them on
the inside below steel washers and they fit well.  A couple squished in due
to tight space.  Thanks, jim

 

From: Cliff Hansen [mailto:cliff_hansen at outlook.com] 
Sent: Sunday, March 01, 2015 12:15 PM
To: trguy75 at gmail.com; triumphs at autox.team.net
Subject: RE: [TR] TR4 Rear Fender Attach

 

Jim

Fiber washer goes between the metal washer and the body tub.  At least
that's where I found old washers.  I think they seal against water ingress.

Cliff

  _____  

From: trguy75 at gmail.com
To: triumphs at autox.team.net
Date: Sun, 1 Mar 2015 10:14:32 -0500
Subject: [TR] TR4 Rear Fender Attach

I am about to attach rear fenders with new hardware kit from TRF on my TR4
project.  The kit has large fiber washers in addition to the metal washers
for all bolts.  My question is that the factory parts book does not
reference the fiber washers, just the bolt, washer (assuming steel), and
fixing nut.  Are the fiber washers supposed to go in between the fender and
body tub? It seems odd to put them on the screw head side, especially since
on the top eight fender bolts that are attached from inside the tub, the
large washers don't fit in that space.  Any help would be greatly
appreciated.  

Thanks in advance!

Jim Henningsen

62 TR4  (putting together one piece at a time - like the Johnny Cash song )

75 TR6

68 Land Rover Series IIA

Ocala FL


** triumphs at autox.team.net ** Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cliff_hansen@outlook.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150301/dc08de09/attachment.html>