[TR] TR4A engine ground strap

john-marie at sbcglobal.net john-marie at sbcglobal.net
Thu Feb 5 20:45:10 MST 2015


Hello List,
Am reassembling my TR4A and trying to sort out the correct attachment points for the engine ground strap.  I have a 2 1/2 inch 3/8-24 bolt with two nuts, a lock washer and 2 star washers that I labeled "engine ground" on disassembly.  Now I can't figure out where it goes.  My photos show the ground attached to a timing chain cover bolt and the other end to the shock tower in an extra bolt hole where the cross tube attaches.  And that is where the old strap wants to be.  The hole in the shock tower is about an inch deep, so simple enough to secure the strap there.  Just don't know where the 2 1/2" bolt with 2 nuts goes.  Could be I mislabeled it.  Any enlightenment will be appreciated.
Lesson learned...be more specific when bagging and labeling. 
John DeLuca

Sent from my iPad


More information about the Triumphs mailing list