[TR] early TR4 door and trunk seals

[Geo Hahn]

I just redid the TR4 fuzzy seal (furflex?) using the cut-to-length ones
offered by TRF.  Was quite a bit less than the $/ft alternative from Moss.

I did not look into TRF's rubber seals as mine are still fine even after 15
years of use.  I would think it unlikely you'll find anything other than a
purpose-made rubber seal that will fit that skinny channel.

Of course, if originality is not a concern &/or if your metal channel is
not in place -- then a TR6 (rubber and fuzzy in one) seal may suit.

Geo

On Thu, Dec 24, 2015 at 9:59 PM, dave n <dave at ranteer.com> wrote:

> anyone have a good source for these rather than the $$$$/ft  moss parts?
>
> thanks!
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151229/0fc90b1a/attachment.html>