[TR] FW: Auto Lift

[tfansher at comcast.net]

Andrew, I have a Mohawk lift made in the USA - Texas I think. It's a two post lift and I have no problem swinging the arms in for the TR3's and out for the Stag. It's rated at 10,000#'s but I wanted way overkill...The posts are independent with just the fluid line running on the top. I don't have the outside measurements with me, but can get them if needed. The width is adjustable, I just went to www.Mohawhlifts.com . I've not had a problem and if someone buys my shop one day, they won't be limited to just LBC's to lift.... 
Hope this helps. 
Tom Fansher 
1960 TR3A 
1961 TRA 
1962 TR4 
1973 Stag Mk II 
----- Original Message -----

From: "Andrew Uprichard" <auprichard at uprichard.net> 
To: "Triumphs" <triumphs at autox.team.net> 
Sent: Wednesday, December 9, 2015 9:52:11 AM 
Subject: [TR] FW: Auto Lift 

Sorry if this has already posted, but I am having trouble getting it out 
there. 


Thank you to all who replied on the car lift question. I still want a 
2-post lift, but need the posts closer together than the usual 140" outside 
diameter. 

A friend told me about a lift sold by Costco - see link below. Does anyone 
have any experience with this particular lift? 

http://www.costco.com/Dannmar-MaxJax%e2%84%a2-2-post-Portable-Auto-Lift.prod 
uct.11731656.html 

Andrew Uprichard 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151209/925c6c4e/attachment.html>