[TR] Trunnions

[ptegler]

??
the premise was oil would allow fine particals of bronze and steel from 
the screw thread grinding as you turn, to fall out of suspension to the 
bottom of the assy rather than acting as a grinding compound between the 
threaded faces.
Modern greases though greatly eliminate this problem.
Personally I do use synthetic grease these days, having only switched 
over about 10 years ago.

ptegler

On 4/22/2015 10:03 PM, rbtr3a at cox.net wrote:
> Grease or oil
>
> Ronnie
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
>

-- 
Paul Tegler ptegler at verizon.net www.teglerizer.com