[TR] TR4A outside door handles

[Cliff Hansen]

I mis-measured, and for some reason my inch symbols don't translate.  The 
wire diameter is 0.038 inches and inside diameter is 0.71 inches.

Cliff


-----Original Message----- 
From: Cliff Hansen
Sent: Saturday, May 24, 2014 9:03 AM
To: list Triumph
Subject: [TR] TR4A outside door handles

Ibve opted to refresh, rather than replace, the outside door handles.  I
disassembled them and found one of the two torsion springs broken.  These
springs aid in the return of the lock cylinder to its neutral position, I
think.  The springs are small gauge (0.015b
), 3 coils, about 0.8b
 inside
diameter.  Anybody know how to locate a suitable replacement?  Ibve looked
locally for spring wire to make my own, without success.

Thanks,

Cliff

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/cliff_hansen@earthlink.net