[TR] TR3a Hood Dzus Fastener

[Wbeech]

You can buy that washer through TRF or Moss.   Or, you may be able to make you
adjust with extra packing under the bracket that attaches to the inner wing.

Sent from mobile Bill

On May 15, 2014, at 2:38 PM, John Wise <john.a.wise at mac.com> wrote:

I was trying to align the left right height on my TR3As hood, and realized
that the right Dzus Fastener had a thin washer between its cap &  the top of
hood & the Dzus Fastener, while the left one does not.  I ant to Lowes and
could not find a washer with both the proper outside diameter and hole size.
I bought one with the correct outside diameter but have not been able to
drily
it out.

I was thinking that something like gasket material or a plastic washer might
be easier to work with and protect the hoods paint.

Any suggestions would be appreciated!

John

John Wise
Ormond Beach, FL

1960 TR3A
http://wisegroupllc.org/_/TR3A.html

1977 Porsche 911S ('86 3.2 engine)
http://wisegroupllc.org/_/Porsche.html

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net