[TR] Power Tap

[Bob Labuz]

Bill,

I added a wire to the white wire to the coil for my electric fuel pump. 
Added an in-line fuse to the pump. Should be a snap for the tack.
I used a spade connector. The coil has female connectors for 2 
connectors. Same solution for my 3, 4 and 72 6.

Bob

On 03/22/2014 11:16 AM, William Pugh wrote:
> I need to tap a power source for our electronic tach. Should be controlled by
> ignition switch, and fused if possible. For the 1970 TR6 aka "Rosey".
>
> Thanks in advance.
>
> Bill Pugh
> Wallace, CA