[TR] TR4 Oil Pump Priming
J.C. Hassall
jhassall at gmail.com
Thu Jul 24 17:20:48 MDT 2014
Jim, you can spin the pump CCW using a distributor gear drive shaft with the
key removed. Kinda diddly process, since aligning the diet gear afterwards
can be fiddly. I did a YouTube video years ago, which is out there somewhere.
Spinning the engine without the plugs works too, but it'll take a while to see
pressure.
Contact me offline if you want more info.
Jim
Fat-thumbed from my iPhone
> On Jul 24, 2014, at 6:40 PM, "James Henningsen" <trguy75 at gmail.com> wrote:
>
> I read that you are supposed to prime a new oil pump with Vaseline or other
> substance. I didn't prime the new pump and it is installed with oil pan
> buttoned up. It is an uprated pump by Steve Yott. Do I need to pull the
> pan and prime this thing??
>
> Thanks in advance,
>
> Jim Henningsen
>
> Ocala FL
>
> 62 TR4 x2
>
> 75 TR6
>
> 69 Land Rover Series IIa
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jhassall@gmail.com
More information about the Triumphs
mailing list