[TR] TR6 Rear Shock Conversion
tr3driver at ca.rr.com
Wed Jul 9 12:12:37 MDT 2014
---- Dave <dave1massey at cs.com> wrote:
> Run, don't walk, away from this conversion. This puts the shock
> loading onto the inner wheel well which was not designed for this
I believe you are thinking of a different conversion. The "Blind Moose" conversion is the one that Herman van den Akker designed and installed on his own TR250. It only attaches to the original shock mount.
BTW, the original shock mount wasn't really designed for the load that a tube shock puts on it either. I've heard many reports of it breaking. So some reinforcement is probably a good idea.
More information about the Triumphs