[TR] TR4 tie rod ends

[Darrell Walker]

Hi John,

You are welcome, of course, I didnt come up with that myself, just repeating
wisdom that was handed down.

And of course, I meant lock nut at the end of the sentence.

-Darrell

On Feb 24, 2014, at 5:27 PM, john-marie at sbcglobal.net wrote:

> Darrell,
>
> Thanks.  Worked like a champ and so simple.  This "List" is a great
resource, especially for my lack of "how to".
>
> John
>
>
>
> Sent from my iPad
>
>> On Feb 22, 2014, at 4:45 PM, Darrell Walker <darrellw360 at mac.com> wrote:
>>
>>
>> Hi John,
>>
>> If pressing the taper into the hole isnt enough to stop them from
rotating, use a non lock nut first to get them seated, then use the lock
washer.
>>
>> -Darrell
>>
>>> On Feb 22, 2014, at 2:31 PM, john-marie at sbcglobal.net wrote:
>>>
>>> Hi List.
>>>
>>> Putting my TR4 steering unit back on with new tie rod ends.  Nylocs are
called
>>> for to secure the tie rods.  How do you hold the threaded balls so the
nuts
>>> can be tightened?
>>>
>>> John
>>> TR4A in restro
>>>
>>> ** triumphs at autox.team.net **
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com