[TR] TR4A rear brake cylinder instal

[john-marie at sbcglobal.net]

Hello list,

I don't remember putting rear brake cylinders on a TR3 many years ago being
this difficult.  I get the spring plate and it's retainer on w/o difficulty.
The small one, called an abutment plate, is another story.  Due to the turned
up ends it is riding above the remaining groove on the cylinder and, in my
case, wants to gouge the cylinder sides.  Also, it looks like once it is in
there, it will be a mighty tight fit.  Not sure the cylinder will slide
correctly during breaking.  Out of ideas!  Of course, I could be doing
something drastically wrong.

John DeLuca
TR4A restro