[TR] TR4A Progress

[Geo Hahn]

You'll probably want to do a trial fit to assure the back edge of the
bonnet clears / does not bind on the front edge of the flap.

As I recall I had to oval the holes just a bit to get a fit I liked.

Geo


On Sun, Sep 22, 2013 at 9:09 AM, Chris Simo <ccsimonsen at gmail.com> wrote:

> How timely - I just removed my vent cowl from the TR4.   I wish I had the
> name of the engineer that designed that -  I would his name in my book of
> shame!!!
>
> 10-32 x 1/2 --  shorter is probably better --  I used stainless since they
> were so hard to get out the first time -- some 15 years later I'm having to
> replace the vent due to rust.  Took a good half hour to remove those 3
> screws!!!!
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com