[TR] TR6 Sill Splatter Coating

[Dave1massey at cs.com]

Probably.  But I seem to recall that stuff tends to look tired after a 
modest number of years whereas the Chip Guard (which was formulated to protect 
painted areas as opposed to being an undercoat) keeps it gloss longer.

If you want originality use Body Schutz.

Dave

In a message dated 9/1/2013 11:37:32 AM Central Daylight Time, 
triumph74tr6 at yahoo.com writes: 
> 3M body schutz is closest to original. Any pro body shop sopply should 
> have it.
> 
>  Sent from Yahoo! Mail on Android
> 
>  
> 
> From: Dave Massey <dave1massey at cs.com>; 
> To: <triumphs at autox.team.net>; 
> Subject: Re: [TR] TR6 Sill Splatter Coating 
> Sent: Sun, Sep 1, 2013 1:31:48 PM 
> 
> 
> I think the best product for this application is a product called Chip 
> Guard.
> It is an elastomeric spray-on coating available in black or clear.  And it 
> is
> paintable.  It remains flexible and will repel small rocks and sand and
> whatnot.  You can find it at any Auto Paint shop.  I used it on my TR8 and 
> it
> held up well over the nine or so years  drove that car.
> 
> 
> 
> 
> 
> Dave Massey