[TR] Head Question

[Jonas Payne]

I use Copper Sealant - either "coppa seal" spray or "copper coat gasket
compound" brush on by K&W - I have never blown a TR3/4 head gasket and have
put heads on 5 of them.

Jonas Payne
PBR Consulting Services, LLC
702.882.6711

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of James Henningsen
Sent: Friday, November 15, 2013 7:15 AM
To: triumphs at autox.team.net
Subject: [TR] Head Question

Ok, this is probably a dumb question, but better safe than sorry.  Do you
use any gasket sealant when installing a new copper head gasket on a TR4
motor?

Thanks,

Jim Henningsen

Ocala FL 

62 TR4

75 TR6

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jpaynepbr@cox.net