[TR] TR3 Headlamp "Pull my hair out' Issues - Thank you.

[Carl TR]

Thanks to Dave, Randall, Greg, & George for the responses.  I will spend some time checking the various suggestions over the next few days.   I noticed on the schematic from Advanced Auto that the fuses are after the relays - I assume to protect the relays from shorting out.    Is there an advantage to that since I'll be 'up there' anyway and wouldn't be a major issue in switching.
 
Thanks again.


Carl
1961 TR3A - TS81802LO
mysite.verizon.net/cfmtr3a
Tampa, Florida


On 05/27/13, Carl-TR wrote:

The project is moving along.. ran into a 'stumper' this afternoon.



See
http://s1001.photobucket.com/user/cfmtr3a/media/TR3AwiringCM_16LampCircuitSM
ALL.png.html (email if problems viewing it)



I have all wired as in the link - but nothing happens when I flip the
switch.

Checked the fuses - ok

Checked juice from the switch - ok

Checked the live wire going into the fuse block - ok



But no lights. 



Wires feed into standard H/L pigtail. 

Grounded at Horn Tower connection. Just in case - put a jumper from ground
lead directly to battery - no difference.



Anything wrong with my schematic? 



Next step is to disconnect at relays and bypass - but I can't believe that
both relays are bad.



Any insight is appreciated..





Carl

1961 Triumph TR3A - TS81802LO

<http://mysite.verizon.net/cfmtr3a/> http://mysite.verizon.net/cfmtr3a/ 

Still being restored - but 2013 looks like the year..

Tampa, FL

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net