[TR] valve cover cap

[wbeech at flash.net]

<.... received it this way.>

Just checked my TCF2549L and the oil cap has the material up in it just like
the new one I bought for my '58.  Of course, no way of telling when these
were replaced by POs.  Personally, before I started shoving any mettalic
mesh material that may in time break down and get into the motor I would
spring for a new one, or there is a fairly nice looking used one on eBay
currently at $20(NFI).

Bill

Bill Beecher
'58 TR3A TS/30766L "Tarbaby"
'62 TR3B TCF/2549L " Aunt B" (in rehab)
www.triumphowners.com/1566
'68 Land Rover Series IIa 88" "The Beast"
"Even if you are on the right track, you'll get run over if you just sit
there"  Will Rodgers



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Dave
Sent: Wednesday, May 22, 2013 10:46 PM
To: triumphs at autox.team.net
Subject: [TR] valve cover cap

my valve cover cap (late tr3b) has nothing in it!  received it this way.
have just got the car running, so I figure I should fill it with something.
steel wool?  coarse?

thanks!

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net