[TR] TR6 ground wire..

Dave Massey dave1massey at cs.com
Sun May 12 05:32:49 MDT 2013


There's an alternate method of grounding the rack! And one Jack would like,
I'll bet.




Dave Massey






-----Original Message-----
From: Tom Note <tom628 at verizon.net>
To: Dave Massey <dave1massey at cs.com>; triumphs <triumphs at autox.team.net>
Sent: Sun, May 12, 2013 12:35 am
Subject: Re: [TR] TR6 ground wire..


Ahhh... that explains why mine works :  I installed the quick ratio rack
with the alloy mounts which apparently provide an adequate ground.

Tom


----- Original Message -----
From: "Dave Massey" <dave1massey at cs.com>
To: <triumphs at autox.team.net>
Sent: Saturday, May 11, 2013 6:40 PM
Subject: Re: [TR] TR6 ground wire..


> That provides the ground for the horn button.  Since the rack is mounted
> in
> rubber there is no reliable ground for the steering and the horn may not
> work.
>
>
>
>
> Dave Massey
>
>
>
>
>
>
> -----Original Message-----
> From: McGaheyRx <McGaheyRx at aol.com>
>
>
> ...the one that comes out of the wiring harness in 2 strands and attaches
> via ring terminal to the bolt on top of the steering rack - what purpose
> does  this serve?
> I am installing a NEW steering rack which has no provision for attaching
> any wire to it and it is not immediately obvious to me whether i need to
> attach  that wire to some other  ground point - or ground the rack at some
> other
>
> point - or both?
>
> Thanks,
> Jack Mc
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/tom628@verizon.net


More information about the Triumphs mailing list