[TR] rear oil seal TR3
Randall
tr3driver at ca.rr.com
Tue May 7 16:24:38 MDT 2013
---- "tr3abobm77 at frontier.com" <tr3abobm77 at frontier.com> wrote:
> Alexander Racing Enterprises
> http://the-vintage-racer.com//index.php
> Click on
> engine componants - second page middle.
> No picture but from the price and
> mention of a core charge you send in your old aluminum seal
> and get a
> machined one in return along with the new Viton seal.
Joe doesn't do that any more; too much hassle with the cores (and people who didn't have a core available). Instead, he now has a shipment of new alloy seal housings. So it is a fully bolt-on kit, except that they recommend some light polishing of the crank surface where the seal rides. You can also get the same kit through TRF (who gets them from Joe).
Here's a photo of the new kit
http://goo.gl/gfv2R
and a copy of the older installation instructions (ignore the section on how to modify the old housing)
http://goo.gl/bqIF3
Randall
More information about the Triumphs
mailing list