[TR] Changing from DOT 3 to DOT 5 Fluif

[Dave1massey at cs.com]

Bubbles will dissipate so long as you don't pump them into the system.  The 
trick is if you dump some fluid into the reservoir and get bubbles, walk 
away.  Comeback a day later and finish up.  

That's hard to do on race day, however.

Dave

In a message dated 5/7/2013 9:23:51 AM Central Daylight Time, 
pethier at comcast.net writes: 
> No trouble with the silicone so far.  I tried to go silicone in an MG 
> Midget autocross car, and things did not go well.  I could never get the tiny 
> bubbles out.  But that car did not have the proper full rebuilt you should 
> do with a silicone conversion.