[TR] Changing from DOT 3 to DOT 5 Fluif
TeriAnn J. Wakeman
tjwakeman at gmail.com
Tue May 7 09:21:01 MDT 2013
On 5/7/13 8:07 AM, Frank Fisher wrote:
> i use DOT5 in my TR3 and have done for about 4 years now.
> the only thing i
> find problematic is my hydraulic brake switch.
> they only last 6 to 9 months.
> i
> have tried them from roadster factory and moss with the same short lived life.
> i can only assume its the DOT5 that eats the rubber, but i have no proof of
> that.
>
The brake light switch failure rate is way too high. I loose one as
often as you do and have been using DOT5 for about 25 years now (Gee
that long??). I replaced one just yesterday. I keep a spare and a
7/8th wrench in the boot.
I always thought it failed from the heat as my brake light switch is
mounted about 2 inches from the exhaust down pipe. Next time the engine
comes out I intend to relocate the brake light switch towards the front
of the engine bay away from the exhaust system.
TeriAnn
More information about the Triumphs
mailing list