[TR] TR3A Windshield Installation

[Frank Fisher]

I have installed my own TS41366L and my friends post 60000 windshields with the stanchions already in place.
it does not allow you to use the little pressed metal ears that hold the bottom weather-strip in place. but they did not appear to be doing much anyway.
Frank



From: "Carl TR" <cfmtr3a at verizon.net>
To: "Triumph Mail List" <triumphs at autox.team.net>
Sent: Thursday, June 27, 2013 12:36:39 AM
Subject: [TR] TR3A Windshield Installation

Tomorrow I put the windshield and glass together. B I've done it before so no
issues there (well sort of - as I remember it can be a bear)

B 

However, I do have a question about mounting it on the car. B Which is easier
a) mounting the stanchions on the car and then doing the windshield or b)
putting it all together before putting it on the car.

This is a post-60k car so the stanchions fasten to the car by means of a
screw rather than a dzus fastener. B Also, the car came with the mounting
pieces that go between the stanchion and body similar to the earlier models
so the stanchions would have to slide onto the mount.

B 

As always - the wisdom of the list is appreciated.

B 

Carl

1961 Triumph TR3A - TS81802LO

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com