[TR] Overheating TR4 - outcome
Dave1massey at cs.com
Dave1massey at cs.com
Wed Jun 12 05:38:07 MDT 2013
If I had a nickel for every time I dug into an expensive subsystem only to
find the problem was a simple/cheap fix...
Dave
In a message dated 6/11/2013 9:19:35 PM Central Daylight Time,
leejohn7 at gmail.com writes:
> My problem was the voltage stabilizer. For reasons too embarrassing to
> divulge, the stabilizer had become disabled.
> Pointing the remote temp gun at the thermostat housing showed a temp at
> idle of 72C, just about right, and no increase upon acceleration.
> So, after all that, all I had to do was reset the wiring on the stabilizer
> and all was well.
> Good grief.
More information about the Triumphs
mailing list