[TR] Pivot Pin removal

[Geo Hahn]

Bill

My recollection is that it is the usual righthand threads.

I assume you've tried PBlaster or some penetrant?

In addition to turning it with a screwdriver using the slot in the head I
think there are also 2 flats on each side of that head that will take a
wrench (7/16"?).  A wrench (if you haven't tried that yet) will give you a
lot more torque (or whatever it is that moves bolts).

Geo


On Sat, Jun 8, 2013 at 7:29 AM, William Pugh <anabil007 at comcast.net> wrote:

> Looking for insight into how to remove the brake pedal pivot pin from the
> brake master cylinder. Old and rusted, but it just won't budge. Is there
> any
> chance it might be reversed screw threads?  I have tried it both ways, but
> can't get it to budge.
>
> Thanks for your time
>
>
> "Life is too short to drive boring cars"
>
> Bill Pugh
> 1957 TR3 "Casper"p  ;
> TS16765L
> Wallace, CA
> anabil007 at comcast.netp
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com