[TR] TR6 Brake Bleeding

[Bob]

Did you center the shuttle as it sounds like it isn't staying centered. 
Here's a couple of good Moss videos that might help.... even walks you 
through a rebuild

http://www.youtube.com/watch?v=7hk73mih2pc

http://www.youtube.com/watch?v=1oI2yrRCUVI&feature=c4-overview-vl&list=PLC91A2C23FE406FAF

Bob


Bob Danielson
http://tr6.danielsonfamily.org/

1975 TR6 modified with:
-Throttle Body Injection
-Toyota 5 Speed
-Nissan Differential
-AAW Wire Harness
-CVJs... and more

-----Original Message----- 
From: Jonas Payne
Sent: Sunday, July 28, 2013 12:46 PM
To: triumphs at autox.team.net
Subject: [TR] TR6 Brake Bleeding

I recently acquired a 1971 TR6 that has been off the road since 2001.  I
have replaced rear wheel cyl, master cyl and rubber brake lines, but am
having difficulty with the shuttle valve in the 4 way union.  Brakes are
bled with firm pedal and no air in system, but shuttle keeps shutting off
the rear circuit, so only the fronts are working.

In order bleed rear brakes, we held the shuttle in place with a small
screwdriver until we had pressure on and no air in the rear circuit,
assuming that once the pressure was equalized that the shuttle would stop
moving, it hasn't.

Any ideas?

Jonas Payne
PBR Consulting
702-882-6711

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/75tr6@tr6.danielsonfamily.org