[TR] TR3A Lazy O/D

[Art McEwen]

Hi Tom, 
 
Why would that be the issue?  The relay is functioning as if it weren't the selonoid woudln't be engaging at all.
 
On 07/23/13, Thomas Geoghan <stgeoghan at yahoo.com> wrote:

> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Change OD Relay.
> Tom
> 
> 
> 
> > 
> > 
> > 
> > 
> > 
> > From: Art McEwen <amcewen2 at cogeco.ca>
> > To: triumphs at autox.team.net 
> > Sent: Tuesday, July 23, 2013 1:07 PM
> > Subject: [TR] TR3A Lazy O/D
> > 
> > 
> > My O/D engaged once on the weekend but refused to do so for the rest of the
> > drive.  It's normally fairly snappy but there's always been the odd time when
> > there's a couple of seconds delay before it engages, but baring Lucas issues
> > it always does.
> > 
> > 
> > 
> > 
> > 
> > When I crawled under afterwards I confirmed the solenoid is engaging but it
> > takes a tiny bit of manual pressure on the off-side external arm to get the
> > O/D to actually kick in, that push seems to be more than the solenoid is
> > capable of even though it seems to draw the arm up far enough.  Out of
> > desperation I changed the oil (10w30) but no joy.
> > 
> > 
> > 
> > 
> > 
> > Im hesitant to adjust the screw on the solenoid plunger since the range of
> > motion seems correct, is there anything else somebody can suggest?
> > 
> > 
> > Art
> > TS64somethingLO
> > 
> > ** triumphs at autox.team.net() **
> > 
> > Donate: http://www.team.net/donate.html()
> > Archive: http://www.team.net/archive()
> > Forums: http://www.team.net/forums()
> > Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wgas2-air@yahoo.com()