[TR] TR engine block

Wbeech wbeech at flash.net
Tue Jan 29 09:06:07 MST 2013

Or, given the latest study from The List, 50/50 solution of acetone & ATF.

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Geo Hahn
Sent: Tuesday, January 29, 2013 7:28 AM
To: David B. Hammond
Cc: list Triumph
Subject: Re: [TR] TR engine block

On Mon, Jan 28, 2013 at 9:25 PM, David B. Hammond <dbh at hamengr.com> wrote:

> Just pulled the head only to discover a broken stud midway on pass side.

If you haven't already, I would be soaking that guy with PBlaster.
Hopefully it is not in there real tight.

I once had one break off but when I reinserted the jagged broken piece it
was able to engage its mate and by pressing down I was able to thread it
out.  I don't expect to get that lucky twice in one lifetime.


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

More information about the Triumphs mailing list