[TR] TR3B timing chain slack

[Geo Hahn]

Bill -

I know this is in the manual somewhere -- but couldn't find it just now.

But my notes from the last time I did this say "per manual, slack of < 0.4"
is acceptable".

What's a mm?

Geo

On Mon, Jan 28, 2013 at 4:25 PM, Wbeech <wbeech at flash.net> wrote:

> What is an acceptable amount of slack in the TR3B (TCF) timing chain?  With
> all the slack on the tensioner side I can measure 25mm of play.  Is this
> OK?
> Thanks,
> Bill;