[TR] TR4 steering column bushings

[darrell floyd]

Thanks Guys,
I used a socket and extension with some PB Blaster and they came out after
some spirited pounding with my Hide Hammer. I took them all the way out
cause I intend to powder coat the column.
Cheers,
Darrell


On Sat, Dec 7, 2013 at 10:38 PM, <glemon at neb.rr.com> wrote:

> Can you put the bushing in with the column still on the car?
>
> Greg Lemon
>
> ---- Roger Elliott <elliottr at rmi.net> wrote:
> > Hi Darrel,
> >
> > I think some people cut those off with an Xacto knife.   I had the tube
> > out of my wife's 250 and just knocked the bushings out with a wooden
> > dowel that was just the right size to slide into the tube.
> >
> > Roger.
> > On 12/07/2013 02:20 PM, darrell floyd wrote:
> > > Hey List,
> > > Has anyone any tips on removing and installing new bushes in the
> steering
> > > column? I am about to attempt the procedure.  I have no clue how to
> depress
> > > the two knobs like the workshop manual suggests to remove the old ones?
> > > Thanks,
> > > Darrell
> > >
> > > ** triumphs at autox.team.net **
> > >
> > > Donate: http://www.team.net/donate.html
> > > Archive: http://www.team.net/archive
> > > Forums: http://www.team.net/forums
> > > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/elliottr@rmi.net
> >
> > ** triumphs at autox.team.net **
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/glemon@neb.rr.com