[TR] TR3A Fuel Gauge Wiring

[greg at gelhar.com]

Someone, in the past, has added an additional ground wire. The gauge
requires grounding and usually only the gauge clamp strap provides it. A
secondary ground makes things work better. Connect the loose end to the
ground screw on the bak of the gauge panel. If the wire was black, it
would be obvious.

Greg G.
Osseo, MN


> Trying to help a friend with his fuel gauge wiring. Ground up restoration.
> New
> harness from one of the major vendors purchased many years ago.
> ?
> Car - TR3A commission 577XX
> One?green and black wire which goes to fuel tank sender and attaches to
> the
> gauge.
> One?lighter green wire that goes to the fuse block and attaches to
> the?gauge.
> Coming from this lighter green wire and the eyelet which goes to the fuel
> gauge is another same color green wire?which is about 5" long.
> ?
> Where does the 5" wire?connect to? There is no electrical connection at
> the
> end. Just cut off.
> ?
> Thanks
> Tom Beaver
> ?
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/greg@gelhar.com