[TR] remove starter motor tr3b

[wbeech at flash.net]

I just remove the nuts that hold the carbs, put a towel on top of the motor,
and roll the carbs up there without disconnecting the choke cable or any
linkage other the the lead arm.

Bill 

Bill Beecher
'58 TR3A TS/30766L "Tarbaby"
'62 TR3B TCF/2549L " Aunt B" (in rehab)
www.triumphowners.com/1566
'68 Land Rover Series IIa 88" "The Beast"
"Even if you are on the right track, you'll get run over if you just sit
there"  Will Rodgers



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Dave
Sent: Sunday, April 21, 2013 11:14 PM
To: triumphs at autox.team.net
Subject: [TR] remove starter motor tr3b

now that its unbolted and loose - it looks like it has to come up?  which
means I have to disconnect the linkage between the carbs, and the gas line?
choke?

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net