[TR] TR4A - wiring harness grommet

[ADRIAN DIX-DYER]

Two quick solutions I can think of:
1, Make the hole in the bulkhead larger or
2, Make the grommet smaller by cutting and re glue with Superglue.
It is very dependent on the circumference of the wiring loom that you have
to hand.

Adrian TR4A CT64306 O
Wales UK.

On 8 September 2012 17:05, Cliff Hansen <cliff_hansen at earthlink.net> wrote:

> Guess Ib m not getting that wiring harness in today.
>
> This is a dumb issue, but, wondering if anyone else dealt with it.  TRF
> sells
> part #RG3 for the large grommet on the RHS of the firewall through which
> the
> wiring harness passes.  This grommet is for a 1 7/8b  hole and is the same
> part number for TR6.  The hole in my car is 1 3/8b .  TRF doesnb t list any
> other part.  Moss only lists a 1 1/2b  grommet for the TR4A and nothing for
> the TR6.
>
> Does anyone know either 1) the correct TRF part #; or 2) if the Moss part
> fits
> a 4A?
>
> Thanks much,
>
> Cliff
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dixie4.wales@virgin.net