[TR] Splash plates for TR4A

[Bob Labuz]

Cliff,

As far as I can tell they are the same. I had a stock NOS set for my TR4 
and they fit perfect as you would expect. On my 6, I had just 1 side and 
I actually fabricated the other by reversing the pattern with the one 
that I did have.

Since I had stock parts, I am guessing that the reproductions are not up 
to spec.

If it was me, I would return them and hope for a set to appear on Ebay. 
Believe it or not they do show up from time to time.

If your old ones are useable to make a pattern, they are not that hard 
to fabricate out of fresh sheet metal.

Bob

On 10/20/2012 07:10 PM, Cliff Hansen wrote:
> Anyone try to fit TRFbs splash plates (behind front wheels, between inner
> and outer fenders)?  They sell the same part for the 4A through 6.  If these
> are the correct parts for the 4A, they will take some significant rebending to
> follow the angles on the inner fender.  Wondering if somehow I got a bad pair
> or if there are better choices out there.
>
> Thanks,
>
> Cliff