[TR] '72 TR6 O/D and Clutch

Bob Labuz yellowtr at adelphia.net
Sat Oct 20 08:36:17 MDT 2012


Martin,

In order to remove the pressure plate and disc, the transmission must 
travel past the front of the pressure plate. Since it is already 
disconnected from the engine (through the disc) you my as well just pull 
it out all the way. Remember the disc must be aligned correctly using a 
jig or a spare input shaft so re-assembling the transmission will go 
smoothly.
The more room the better.

In my younger days, I could do this myself but the last time I did it I 
had an assistant.

Bob

On 10/20/2012 09:56 AM, M. Secrest wrote:
> This winter's project is to r/r my overdrive, at which time I'd like to
> replace the clutch. Can I do this w/o actually lifting the gearbox out of the
> car, just sliding it back?
>
> Martin Secrest
> 72 TR6
> Arlington, VA
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr@adelphia.net


More information about the Triumphs mailing list