[TR] tr-3 grill

[Randall]

> It seems to be a little larger than 
> expected and
> also will need to have a little more of a "bow" bent into it. 

I had that problem with my TR3A (which I assume is what you are talking
about).  My fault, really, as I didn't give the body shop any measurements
for the grille opening after some kind person backed into me in a parking
lot and didn't even leave a note.

But the grille was fairly soft, easy to bend by hand, and IMO didn't look
too bad with a significant curve bent into it.

Here's a shot where you can kind of see the curve:
http://tinyurl.com/9mvtdnm

After bending the center enough to fit into the opening, I used some love
taps with a body hammer to work the rolled edge back down against the body.

-- Randall